Inconel 601 Round Bars

Inconel Alloy DIN 2.4851 Bright Bar, Inconel Alloy 601 Hex Bars, Ferrochronin 601 Cold Finished Bars Suppliers in India. ASTM B166 Inconel UNS N06601 Round Bars, Inconel 601 Flat Bar Exporter, 601 Square Bars Leading Manufacturers.

A.B. Stainless Steel is one of the largest exporter, manufacturer and supplier of Inconel Alloy 601 Round Bars in India. We offer different types of these bars such as Inconel 601 Bright Bars, Inconel 601 Hex Bars, Inconel Black Bars, Inconel 601 Flat Bars, Inconel 601 Billets Bars, and Inconel 601 Forged Bars. Inconel 601 Round Bars (also known as UNS N06601 Round Bars and Rods) establishes because of its resistance to enhanced temperature oxidation, lasting remarkably resistant to oxidation in the course of 2200 Deg F. When heated, these Inconel Alloy 601 Rods, shapes a thick, passivating and stable oxide coating that safeguards the external from more outbreak.

Our Inconel 601 Bars are accessible to our valuable customers in different range of diameters, wall thicknesses and sizes in customized form and also at quite affordable rates.

Inconel Alloy 601 Round Bars Specification

Specification : ASTM B 166 / ASME SB 166, AMS 5715, DIN 17752, DIN 17753, DIN 17754, EN10095, ISO9723, ISO 9724, ISO 9725

Dimensions : ASTM, ASME and API

Size : 5 mm To 500 mm Dia in 100 mm TO 6000 mm Length available with NACE MR 01-75.

Diameter : 0.1 mm to 100 mm

Length : 100 mm To 3000 mm Long & Above

Finish : Bright, Polish & Black

Grade : Inconel 601 – UNS N06601

Form : Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wire-mesh, Billet, Ingot, Forging Etc.

Our Inconel 601 Round Bars conforms to NACE MR0175/ISO 15156

ASTM B166 Inconel 601 Bars Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS	GOST	AFNOR	JIS	BS	EN	OR
Inconel 601	2.4851	N06601	XH60BT	NC23FeA	NCF 601	NA 49	NiCr23Fe	ЭИ868

Inconel Alloy 601 Round, Bright, Hex, Threaded Bar Chemical Composition

Grade	Ni	Cr	Fe	C	Mn	S	Si	Cu
Inconel 601	58.0 - 63.0	21.0 -25.0	Balance	0.10 max	1.0 max	0.015 max	0.5 max	1.0 max

601 Inconel Alloy Round Bars Mechanical Properties

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
8.1 g/cm3	1411 °C (2571 °F)	Psi – 80,000 , MPa – 550	Psi – 30,000 , MPa – 205	30 %

Types Of Available Products AISI, ASTM, DIN, ASME Inconel 601 Round Bars