Rig Wash Liquid Concentrate 210 Ltr

Item Code: RXSOL-16-1014-210

• Tamper proof packing
• No side effects
• Safe packaging

• 78 - 82 %

• 210.00 Ltr.

• Can be used through hot or cold pressure washing machines to penetrate, loosen and flush away hardened grease, dirt and grime
• Apply the solution from the spray lance working upwards. Always test first with small area for the best dilution rate
• Im general terms 20-50 % with fresh water

• Rig Wash and pressure cleaner is for all temperature has a powerful and fast wetting and penetrating action which enable it to remove heavy deposits of oil, dirt and grease from concrete or metal surfaces, vessel bilge decks, engine Room and drill floor etc
• Also acts as an acid-neutralizing agent for Boiler & Colling systems during cleaning & maintenance

• Remains stable at high or low temperatures
• Can be used with steam cleaners or cold washers
• No clogged coils
• No undissolved particles
• 100% water soluble in soft or hard water

• No harsh fumes in use
• Ideal for use in wherever galleys, galleys, cabin, engine room, bilges, drill floors etc
• Non-corrosive does not attack metal surfaces, Contain-non caustic
• Compatible with oily water separators
• Releasing the oil phase for reclamation
• Suitable for all types of floors. Deodorizing nature
• Eliminates the need to buy & stock duplicate products because of its effectiveness
• An economic highly concentrated product

Other Valueaded Products

1) Water Soluble Demulsifier

RXSOL water soluble demulsifier is a totally organics surfactants solution with water and soluble in crude oil for the demulsification of oil in water, capable of performance at room temperature, but with improved speed and percentage of oil removed when applied at temperatures higher about 20 degree of room temperature. RXSOL salt removal demulsifier destabilizes the oil-water interface that surrounds each water particle in the emulsion, replaces the emulsifier molecules (if any), and allows the water to coalesce. RXSOL demulsifier is a completely non-hazardous, non-toxic, biodegrable, non-corrosive, non-abrasive; non-ash-forming treatment, which will improve the quality of the fuel it, is added to. Part No.- RXSOL-81-8157-210

2)Demulsifier ORG ::: Power of Chemical to break EMULSION in two phase hydrocarbon phase (oil) and a water-phase. Dosage and application will vary based on emulsion characteristics. For most crude or fuel oil based emulsions, a starting concentration of 0.1% at 165°F with a minimum heated recirculation contact time. Part No.- RXSOL-81-8159-210