Portable Water Treatment Liquid

Item Code: RXSOL-32-3104-025

• Effective at temperatures up to 60°C
• Accurate composition
• Unmatched quality

• Prevents «Red Water» in potable water systems
• Provides scale and corrosion control in hot water heaters, coolers and water tanks
• Controls corrosion in pipelines and other equipment handling softened or evaporated water
• Effective at temperatures up to 60°C (140°F). Increases system life and reduces maintenance costs
• Approved by Norwegian National Institute of Public Health asan additive to drinking water
• Approved by NSF according to Standard 60
• No restrictions on use of the treated water as feed water to boilers or engine cooling systems

• Potable Water Stabilizer effectively and economically provides scale and corrosion
• Control in potable water systems and other shipboard once-through water systems
• Dosage varies between 4, 8 mg/Ltr for ordinary water treatment
• For drinking water, dosage should always be kept at or below 9 mg/Ltr (9 g/ton)
• The powder product should not be dosed directly into the water system
• A water solution should be made prior to dosing

• Potable Water Stabilizer should be dosed to a suitable point in the system
• If the expansion tank is used, adequate circulation must be assured

• Make a 5% solution in fresh water by adding the powder slowly to the water while stirring
• The solution should preferably ne portioned to maintain desired dosage
• Either by means of a simple bypass feeder, or with rxsol Dosage System for Water Treatment
• The product can be injected into the discharge line of the fresh water generator or directly into the fresh water pumps’ suction manifold
• If a high percentage of shore water is used the solution must be “slug” dosed into the tanks prior to taking water
• Inject a 5% solution at a rate of 0.12 liters per m3 of water to obtain a 6 mg/Ltr concentration